What I had in mind
+14
canuck girl
ajchimaera
Eric
Corwin
Avara
Turin
Graeme of the stupidly lo
Alanna
nadine
Janet-Xenia
InKibus
Juliejools
tree
Cyanure
18 posters
Page 4 of 8
Page 4 of 8 • 1, 2, 3, 4, 5, 6, 7, 8
Re: What I had in mind
Juliejools wrote:With regard to getting things to AJ and Rosie, all I can say is we'll have to wait and see what happens, I have to think what to put on the customs form to make them think it's not wood
"A puzzle"?
Alanna- Posts : 64
Join date : 2008-10-15
Age : 50
Location : Paris, France
Re: What I had in mind
I was thinking of putting 'art material' as that is essentially what it is, a substrate for AJ & Rosie to work on. If that does not work we'll come up with something else.
Graeme
Graeme
Re: What I had in mind
If the pieces are returned then the alternative is AJ and Rosie send their works of art to Graeme and I, we can stick that onto the pieces and then forward them to Carol.
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
I would imagine that if the pieces are plywood, and sanded and primed it would not cause a problem....the concern would be insects, etc. from raw wood, but I don't know what the regulations are.
canuck girl- Posts : 14
Join date : 2008-10-17
Re: What I had in mind
The wood, if you can call it that is MDF..link.
It has already been cut to size, drilled and has it's first coat of white primer on one side. We can do no more until that is dry.
It has already been cut to size, drilled and has it's first coat of white primer on one side. We can do no more until that is dry.
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
7.5 cms (3 inches) square, with a 4mm hole drilled near the centre of the top and bottom edges.
We just primed the second side and they're all drying now.
We just primed the second side and they're all drying now.
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
There shouldn't be any regulations about mdf, should there? It's not a 'natural" or "organic" product.
Has somebody purchased 4mm pink ribbon?
Has somebody purchased 4mm pink ribbon?
Janet-Xenia- Posts : 50
Join date : 2008-10-15
Re: What I had in mind
Yes it's ordered along with the envelopes.
Thought I'd mentioned it somewhere sorry, 10 yards (metres) of it
Edit: yes I mentioned it on the previous page of this thread
Thought I'd mentioned it somewhere sorry, 10 yards (metres) of it
Edit: yes I mentioned it on the previous page of this thread
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
Things seem to be all agreeded.
I just want to let you know that I totally concur with square tiles linked together with the pink ribbon.
So, I look forward to receive my little piece of wood.
(Hey! These smiles are so funny! )
I just want to let you know that I totally concur with square tiles linked together with the pink ribbon.
So, I look forward to receive my little piece of wood.
(Hey! These smiles are so funny! )
irene- Posts : 6
Join date : 2008-10-20
Re: What I had in mind
MDF should be fine, since it's processed - they should only really have a problem if it's living wood, since they're paranoid about bugs getting into native trees (too late, but it's a native borer that does the damage, so I'm not sure what their problem is...)
If all else fails, indeed, we'll make sure we do something that can be sent to G&J to be transfered to the wood.
Down to 3 inches now? That's alright, plenty of room.
If all else fails, indeed, we'll make sure we do something that can be sent to G&J to be transfered to the wood.
Down to 3 inches now? That's alright, plenty of room.
ajchimaera- Posts : 12
Join date : 2008-10-15
Re: What I had in mind
Alanna wrote:Juliejools wrote:With regard to getting things to AJ and Rosie, all I can say is we'll have to wait and see what happens, I have to think what to put on the customs form to make them think it's not wood
"A puzzle"?
Uuugh, not to go totally OT, but my sympathies.There shouldn't be any regulations about mdf, should there? It's not a 'natural" or "organic" product.
It was difficult shipping a wood crib to Australia...
but the plywood crate caused more fuss.
We had a few day delay because of all these questions regarding the wood treatment
aspects and what kind of wood was it and....
Crafting materials/supplies covers a lot of territory on customs forms.
InKibus- Posts : 34
Join date : 2008-10-15
Re: What I had in mind
I'm still here. Have laptop, will travel.
To give a rundown on what we have so far:
Sorry if I've missed anything.
To give a rundown on what we have so far:
- Size of each square, 3" (7.5 cm)
- Graeme and Jools have already cut out all squares and primed them.
- The pink ribbon has been ordered.
- G&J will get with InKi about whether they or she will do the pegboard.
- The padded envelopes have been ordered.
- Each piece will be delivered in the envelope with an address label with Carol's address.
Sorry if I've missed anything.
Avara- Posts : 50
Join date : 2008-10-15
Age : 52
Location : Richardsville, VA
Re: What I had in mind
Thanks Avara, I'll also include in the envelope a printed sheet with instructions on what to do just to save folks reading through this forum again. I started writing that out last night
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
Kudos to Jools and Graeme for all that good (and quick) work!
Alanna- Posts : 64
Join date : 2008-10-15
Age : 50
Location : Paris, France
Re: What I had in mind
The pink ribbon arrived with me this morning, at around 6:30 am, the benefit of working in the delivery office is getting your mail very early We're just waiting on the padded envelopes.
Today has seen further sanding and priming of the pieces. Realistically we're looking at posting out the first pieces on Friday
Graeme and Inki are working out the board to hang the pieces from between them, I think we trust them enough to do a good job don't we?
Today has seen further sanding and priming of the pieces. Realistically we're looking at posting out the first pieces on Friday
Graeme and Inki are working out the board to hang the pieces from between them, I think we trust them enough to do a good job don't we?
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
Do we have a choice? Just kidding. I'm glad they are coordinating it.Juliejools wrote:Graeme and Inki are working out the board to hang the pieces from between them, I think we trust them enough to do a good job don't we?
BTW, happy to be of service, Jools.
Avara- Posts : 50
Join date : 2008-10-15
Age : 52
Location : Richardsville, VA
Re: What I had in mind
Nadine, that's great, well done you
What I would suggest is that you make sure your name is on your piece somewhere so that Carol knows who created each mini artwork
What I would suggest is that you make sure your name is on your piece somewhere so that Carol knows who created each mini artwork
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
But it is - lower right-hand corner.
Cute.
I'll do a cow.
Cute.
I'll do a cow.
Alanna- Posts : 64
Join date : 2008-10-15
Age : 50
Location : Paris, France
Re: What I had in mind
Ok I need to clean my computer screen and/or my glasses, sorry
Juliejools- Posts : 146
Join date : 2008-10-15
Age : 60
Location : Cumbria
Re: What I had in mind
Alanna wrote:But it is - lower right-hand corner.
Cute.
I'll do a cow.
really?
Imagine that.
I haven't decided exactly what I want to do, but I think I'll send a "get well" card with it to express the sentiment and just let the art on the wood piece be art. I want it to be hanging on her wall for years and years after the cancer thing is in remission.
Janet-Xenia- Posts : 50
Join date : 2008-10-15
Re: What I had in mind
Lovely start Nadine.
We should have a thread for a pic of ONLY finished pieces? Eventually, when we get there,
We should have a thread for a pic of ONLY finished pieces? Eventually, when we get there,
InKibus- Posts : 34
Join date : 2008-10-15
Re: What I had in mind
I've got a couple of thoughts, though one's quite abstract.
I'll post them once they're drafted up - they're a bit amorphous in my head atm ;o)
I'll post them once they're drafted up - they're a bit amorphous in my head atm ;o)
ajchimaera- Posts : 12
Join date : 2008-10-15
Page 4 of 8 • 1, 2, 3, 4, 5, 6, 7, 8
Page 4 of 8
Permissions in this forum:
You cannot reply to topics in this forum
|
|